lemon-mirror:
Home >> Scion >> 2007 >> tC Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Combination Meter >> Removal

Combination Meter: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE METER HOOD SUB-ASSEMBLY 
    1. Tilt the steering column assembly down as far as possible.
    2. Using a moulding remover, detach the 9 claws.

      HINT: 

      Tape the moulding remover tip before use.

    3. Remove the meter hood.
      Fig 1: Identifying Meter Hood Claw
      G04867269Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the screw and detach the 2 claws.
    2. Remove the combination meter and disconnect the connectors.
      Fig 2: Identifying Combination Meter Claws And Screw
      G04867270Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE COMBINATION METER GLASS 
    1. Detach the 8 claws, and then remove the combination meter glass.
      Fig 3: Identifying Combination Meter Glass Claw
      G04867271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror