2AZ-FE Charging: Generator: Installation

INSTALL GENERATOR ASSEMBLY
1. Install the wire harness clamp bracket with the bolt.
  Torque: 8.4 N*m (86 kgf*cm, 74 in.*lbf)
  
  Fig 1: Locating Wire Harness Clamp Bracket With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the generator assembly with the 2 bolts.
  Torque: Bolt A
  
  21 N*m (215 kgf*cm, 16 ft.*lbf)
  
  Bolt B
  
  52 N*m (530 kgf*cm, 38 ft.*lbf)
  
  Fig 2: Locating Generator Assembly With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the generator wire to terminal B with the nut.
  Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
4. Attach the clamp and connect the generator connector to the generator.
5. Install the 2 wire harness clamps.
  
  Fig 3: Locating Generator Wire To Terminal B With Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FAN AND GENERATOR V BELT (See INSTALLATION )
INSTALL REAR ENGINE UNDER COVER RH
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 47 in.*lbf)