2AZ-FE Charging: Generator: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE REAR ENGINE UNDER COVER RH
REMOVE FAN AND GENERATOR V BELT (See REMOVAL )
REMOVE GENERATOR ASSEMBLY
1. Disconnect the generator connector.
2. Remove the nut and disconnect the wire harness from terminal B.
3. Separate the 2 wire harness clamps.
  
  Fig 1: Locating Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 bolts and generator assembly.
  
  Fig 2: Locating Bolts And Generator Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the bolt and remove the wire harness clamp bracket.
  
  Fig 3: Locating Wire Harness Clamp Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002