lemon-mirror:
Home >> Scion >> 2008 >> xB Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> U241E Automatic Transaxle >> Speed Sensor >> Removal

Speed Sensor: Removal

  1. REMOVE BATTERY  (See REMOVAL )
  2. REMOVE NO. 2 BATTERY CARRIER  (See REMOVAL  )
  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY  (See REMOVAL  )
  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY  (See REMOVAL  )
  6. REMOVE SPEED SENSOR NT 
    1. Disconnect the speed sensor NT connector.
    2. Remove the bolt and remove the speed sensor NT.
    3. Remove the O-ring from the speed sensor NT.
      Fig 1: Locating Bolt And Speed Sensor NT
      G05388025Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE SPEED SENSOR NC 
    1. Disconnect the speed sensor NC connector.
    2. Remove the bolt and remove the speed sensor NC.
    3. Remove the O-ring from the speed sensor NC.
      Fig 2: Locating Bolt And Speed Sensor NC
      G05388026Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror