lemon-mirror:
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> U341E Automatic Transaxle >> Speed Sensor >> Installation

Speed Sensor: Installation

  1. INSTALL SPEED SENSOR NT 
    1. Coat a new O-ring with ATF, and install it onto the speed sensor NT.
      Fig 1: Identifying Speed Sensor NT O-Ring
      G04831087Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the speed sensor NT with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      Fig 2: Locating Speed Sensor NT Connector And Speed Sensor NT Bolt
      G04831086Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the speed sensor NT connector.
  2. INSTALL BATTERY CARRIER  (See INSTALLATION )
  3. INSTALL BATTERY TRAY 
  4. INSTALL BATTERY  (See INSTALLATION )
  5. INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK 
· About lemon-mirror