lemon-mirror:
Home >> Scion >> 2009 >> tC Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Other System >> Power Point Socket >> Removal

Power Point Socket: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  3. REMOVE FRONT CONSOLE PANEL UPPER  (See REMOVAL )
  4. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY UPPER  (See REMOVAL )
  5. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE POWER POINT SOCKET ASSEMBLY 
    1. Turn the socket in the direction as shown in the illustration, disengage the claw between the socket and the power point socket cover, and pull out the socket.
      Fig 1: Turning Socket
      G05541718Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Align the socket with the notch on the power point socket cover, and remove the power point socket.
    Fig 2: Locating Notch On Power Point Socket Cover
    G05541722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror