lemon-mirror:
Home >> Scion >> 2009 >> tC Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Combination Meter >> Installation

Combination Meter: Installation

  1. INSTALL COMBINATION METER GLASS 
    1. Attach the 8 claws to install the combination meter glass.
      Fig 1: Identifying Combination Meter Glass Claws
      G05541664Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector and install the combination meter.
    2. Attach the 2 claws to install the screw.
      Fig 2: Identifying Combination Meter Assembly Claws And Screw
      G05541665Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL METER HOOD SUB-ASSEMBLY 
    1. Attach the 9 claws to install the meter hood.
      2. Fig 3: Identifying Meter Hood Claws
      G05541666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  6. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
· About lemon-mirror