Combination Meter: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE METER HOOD SUB-ASSEMBLY
1. Tilt the steering column assembly down as far as possible.
2. Using a moulding remover, detach the 9 claws.
  HINT:
  
  Tape the moulding remover tip before use.
3. Remove the meter hood.
  
  Fig 1: Identifying Meter Hood Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COMBINATION METER ASSEMBLY
1. Remove the screw and detach the 2 claws.
2. Remove the combination meter and disconnect the connectors.
  
  Fig 2: Identifying Combination Meter Assembly Screw And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COMBINATION METER GLASS
1. Detach the 8 claws, and then remove the combination meter glass.
  
  Fig 3: Identifying Combination Meter Glass Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002