lemon-mirror:
Home >> Scion >> 2009 >> xB Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Control Receiver >> Installation

Door Control Receiver: Installation

  1. INSTALL DOOR CONTROL RECEIVER 
    1. Install the door control receiver with the bolt.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

    2. Connect the connector.
    Fig 1: Locating & Installing of Door Control Receiver Bolt And Connector
    G05391089Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ROOF SIDE GARNISH INNER ASSEMBLY RH  (See INSTALLATION )
  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH  (See INSTALLATION )
  4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY  (See INSTALLATION )
  5. INSTALL REAR NO. 1 SEAT BELT OUTER ASSEMBLY RH  (See INSTALLATION )
  6. INSTALL REAR DECK TRIM COVER  (See INSTALLATION )
  7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH  (See INSTALLATION )
  8. INSTALL REAR DOOR SCUFF PLATE RH  (See INSTALLATION )
  9. INSTALL REAR SEATBACK ASSEMBLY RH  (See INSTALLATION )
  10. INSTALL REAR SEAT CUSHION ASSEMBLY  (See INSTALLATION )
  11. INSTALL REAR DECK FLOOR BOX  (See INSTALLATION )
  12. INSTALL DECK FLOOR BOX RH  (See INSTALLATION )
  13. INSTALL REAR FLOOR CARPET ASSEMBLY  (See INSTALLATION )
· About lemon-mirror