Customize Parameters

CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Customize Setting.

Select the setting by referring to the table below.

Main Body

CUSTOMIZE PARAMETERS - MAIN BODY

Display

Default

Contents

Setting

Unlock Key Twice

Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice For OFF setting, turning it once unlocks all doors

ON/OFF

Auto lock

OFF

Function that locks all doors when vehicle speed reaches a certain level

ON/OFF

Automatic door lock linked shift⁽¹⁾

With engine running and all doors closed, function that locks all doors when lever is moved to P from any position other than P

ON/OFF

Automatic door unlock linked shift⁽¹⁾

Function that unlocks all doors when lever is moved to P from any position other than P while ignition switch is ON

ON/OFF

All Unlock w/ D door open-close

OFF

Function that unlocks all other doors when opening driver door within 10 seconds after turning ignition switch ON

ON/OFF

⁽¹⁾	for Automatic Transaxle