System Description

WIRELESS DOOR CONTROL SYSTEM DESCRIPTION
1. The wireless door lock control system functions to lock and unlock all the doors from a distance. The system is controlled by a hand-held transmitter which sends radio waves to the door control receiver. The main body ECU performs an ID code identification process and engages the door lock control.

FUNCTION OF MAIN COMPONENTS

Components	Functions
Door control transmitter	Contains LOCK, UNLOCK and PANIC switches Transmits weak radio waves (recognition codes and function codes) to the door control receiver Illuminates indicator light (LED) during transmitter
Door control receiver	Receives weak radio waves (recognition codes and function codes) and outputs them as code data to the main body ECU
Door lock position switch	Transmits the door lock positions of each door to the main body ECU
Unlock warning switch	Detects if key is in ignition key cylinder
Front door courtesy light switch Rear door courtesy light switch Back door courtesy light switch	Turns ON when door is open and turns OFF when door is closed Outputs door status (open or closed) to main body ECU
Main body ECU	Sends wireless door lock control signals in response to the code data from the door control receiver and signals from each switch

SYSTEM FUNCTION

The door control transmitter has the LOCK and UNLOCK switches. Operating these switches activates each function. The wireless door lock control system has the following functions.

HINT.

The default settings of the following functions are ON. Part of these functions can be customized (See CUSTOMIZE PARAMETERS ).

FUNCTION OUTLINE

Function	Outline
All door lock function	Pressing LOCK switch locks all doors
All door unlock operation (2 step unlock operation) function	Pressing UNLOCK switch twice within 3 seconds unlocks all doors after driver side door is unlocked
Answer-back function	Hazard warning lights flash once when doors are locked, and flash twice when doors are unlocked to indicate that operation has been completed Wireless door lock buzzer sounds once when doors are locked and sounds twice when doors are unlocked to inform that operation has been completed
Automatic locking function	If no doors are opened within 60 seconds after being unlocked by wireless transmitter, all doors are locked again automatically
Door ajar warning function	If any door is open or ajar, pressing LOCK switch will cause wireless door lock buzzer to sound for about 10 seconds
Illuminated entry function	If locked doors are unlocked through wireless operation, room light illuminate If one of following situations occurs, lights fade out Within 15 seconds, doors are not opened and doors are locked through wireless operation Within 15 seconds, key is inserted into ignition key cylinder and ignition switch is turned ON No operations or actions are performed within 15 seconds
Panic function	Pressing PANIC switch for more than 0 8 seconds sounds vehicle horns and blinks hazard warning lights, headlights, taillights, turn signal lights
Transmitter recognition code registration function	Enables the registration (writing and storing) of 6 types of transmitter recognition codes in the EEPROM that is contained in the door control receiver

CONDITIONS THAT WIRELESS FUNCTIONS DO NOT OPERATE
1. Lock operation is not available when:
  - Any of the doors is open.
  - The key is inserted in the ignition key cylinder.
2. Unlock operation is not available when:
  - The key is inserted in the ignition key cylinder.