lemon-mirror:
Home >> Scion >> 2009 >> xB Automatic >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Outer Mirror Switch >> Installation

Outer Mirror Switch: Installation

  1. INSTALL OUTER MIRROR SWITCH ASSEMBLY 
    1. Engage the 2 claws and install the outer mirror switch assembly.
    Fig 1: Identifying Outside Mirror Switch Assembly Claws
    G05391367Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 SWITCH HOLE BASE  (See INSTALLATION )
  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL COMBINATION METER ASSEMBLY  (See INSTALLATION )
  5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY  (See INSTALLATION )
  6. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL FRONT PILLAR GARNISH RH  (See INSTALLATION )
  8. INSTALL FRONT PILLAR GARNISH LH  (See INSTALLATION )
  9. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH  (See INSTALLATION )
  10. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH  (See INSTALLATION )
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

· About lemon-mirror