lemon-mirror:
Home >> Scion >> 2009 >> xB Automatic >> Repair and Diagnosis >> Transmission >> U241E Automatic Transaxle >> Speed Sensor >> Installation

Speed Sensor: Installation

  1. INSTALL SPEED SENSOR NC 
    1. Coat a new O-ring with ATF, and install it into the speed sensor NC.
    2. Install the speed sensor NC with the bolt.

      Torque: 8.8 N*m (90 kgf*cm, 78 in.*lbf) 

    3. Connect the speed sensor NC connector.
    Fig 1: Locating Bolt And Speed Sensor NC
    G05388026Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL SPEED SENSOR NT 
    1. Coat a new O-ring with ATF, and install it into the speed sensor NT.
    2. Install the speed sensor NT with the bolt.

      Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

    3. Connect the speed sensor NT connector.
    Fig 2: Locating Bolt And Speed Sensor NT
    G05388025Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY  (See INSTALLATION  )
  4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY  (See INSTALLATION  )
  5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY  (See INSTALLATION )
  6. INSTALL NO. 2 BATTERY CARRIER  (See INSTALLATION  )
  7. INSTALL BATTERY  (See INSTALLATION )
  8. INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK 
· About lemon-mirror