lemon-mirror:
Home >> Scion >> 2013 >> tC Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System (Service Information) >> Generator >> Installation >> Installation

Charging System (Service Information): Generator: Installation: Installation

  1. INSTALL GENERATOR ASSEMBLY 
    1. Install the generator with the 2 bolts.

      Torque: 52 N*m (530 kgf*cm, 38 ft.*lbf) 

    2. Install the wire harness clamp bracket with the bolt.

      Torque: 8.4 N*m (85 kgf*cm, 74 in.*lbf) 

    3. Connect the generator wire with the nut.

      Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf) 

    4. Install the terminal cap.
    5. Connect the generator connector.
  2. INSTALL WIRE HARNESS CLAMP BRACKET 
    1. Install the clamp bracket with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    2. Attach the wire harness clamp to the clamp bracket.
  3. INSTALL FAN AND GENERATOR V BELT 

    Refer to INSTALLATION

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
· About lemon-mirror