lemon-mirror:
Home >> Scion >> 2016 >> iA Automatic Trans >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Warning System Initialization >> Using The Techstream

Using The Techstream

NOTE: To perform this procedure, a Toyota Techstream must be used. When using the Techstream, the mis-use prevention logic is disabled.
  1. Set the tire pressure of all wheels to the pressure specified on the tire and loading information label.
  2. Connect the Techstream to the DLC-2.
  3. After the vehicle is identified, select the following items from the initial screen of the Techstream: Chassis / ABS/VSV / TPWS Reset.
  4. Perform the procedure according to the directions on the screen.
  5. When the tire pressure warning system initialization is performed, LEARNING initiates. Learning is completed by driving the vehicle for approx. 20 min.
· About lemon-mirror