Armature Test
- With starter disassembled, check armature for shorts using a growler. Hold hacksaw blade against armature while slowly rotating armature. A shorted armature will cause hacksaw blade to vibrate when passed over shorted area. Replace as necessary.
- Use an ohmmeter to check for grounded armature. Touch one probe to each segment of commutator and hold other probe to armature core. If any continuity exists, replace armature.
- Use ohmmeter to check for open circuit. If continuity is not present between any 2 commutator segments, replace armature. Check commutator for outside diameter wear, out-of-round and proper mica insulation depth. See STARTER SPECIFICATIONS
.
- When correcting out-of-round condition, DO NOT reduce commutator diameter below specification. If mica insulation is even or higher than commutator surface, mica insulation must be undercut. See Fig 1
. See STARTER SPECIFICATIONS
.
Courtesy of SUBARU OF AMERICA, INC.