lemon-mirror:
Home >> Subaru >> 1994 >> Legacy Alpine >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Starter Interlock Relay Test >> M/T

Starter Interlock Relay Test: M/T

  1. Interlock relay has a Blue 4-terminal connector and is located on brake pedal bracket, next to brakelight switch. Locate and unplug relay.
  2. Connect test light to terminal No. 3 (Red/Yellow wire) of interlock relay. See Figure . Using jumper wire, apply 12 volts to terminals No. 2 and 4 (Blue/Red wires) of relay. Using another jumper wire, connected to ground, momentarily touch terminal No. 1 (Green/Yellow wire) of relay. If test light does not illuminate, replace relay.
· About lemon-mirror