Throttle Position (TP) Sensor & Switch

THROTTLE POSITION (TP) SENSOR RESISTANCE

Application

⁽¹⁾ TP Connector Terminals

Ohms

Total Resistance

Black Wire & Red Wire

12,000

Variable Resistance

Throttle Closed

Black Wire & White Wire

10,000-12,000

Throttle Open

Black Wire & White Wire

3000-5000

⁽¹⁾	Unplug TP sensor connector. At component side of connector,connect ohmmeter between the indicated terminals.

THROTTLE SWITCH (IDLE SWITCH) CONTINUITY

Application

⁽¹⁾ Terminals

Legacy

Brown Wire & Black Wire

⁽¹⁾	Unplug TP sensor connector. Check for continuity between specified terminals of connector. There should be continuity with throttle closed, and no continuity with throttle open.