lemon-mirror:
Home >> Subaru >> 1994 >> Loyale Automatic >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Circuit Test >> M/T

Circuit Test: M/T

  1. Turn ignition switch to START position, press clutch pedal to floor and check for near battery voltage at starter solenoid terminal No. 50 (Black/White wire). If near battery voltage exists and starter does not crank, repair or replace starter. If voltage does not exist, check for voltage at clutch switch Black/White wire terminal when clutch pedal is pressed to floor.
  2. Clutch switch is located at top of clutch pedal arm. If voltage exists at Black/White wire terminal of clutch switch, repair wiring between clutch switch and starter. If voltage does not exist, check for voltage at Black/Yellow wire terminal of clutch switch. If voltage exists, replace clutch switch.
  3. If voltage does not exist at Black/Yellow wire terminal of clutch switch, check for near battery voltage at ignition switch terminal "S" (Black/Yellow wire). If voltage exists, repair Black/Yellow wire between ignition switch and clutch switch.
  4. If voltage does not exist at ignition switch terminal "S" (Black/Yellow wire), check for battery voltage at ignition switch battery terminal. If voltage does not exist, replace ignition switch.
· About lemon-mirror