Power Mirror Motor
Remove door panel. Disconnect mirror motor harness connector. Using 12-volt power supply and 2 jumper wires, apply voltage and ground to specified terminal. See the POWER MIRROR MOTOR TEST . SeeFig 1 .
POWER MIRROR MOTOR TEST
| Movement | Pin No. (+) (Wire Color) | Pin No. (-) (Wire Color) | |
|---|---|---|---|
| Left Mirror | |||
| Up | 1 (Red) | 3 (Light Green/Red) | |
| Down | 3 (Light Green/Red) | 1 (Red) | |
| Left | 2 (Black/Red) | 3 (Light Green/Red) | |
| Right | 3 (Light Green/Red) | 2 (Black/Red) | |
| Right Mirror | |||
| Up | 1 (Red) | 3 (Brown/Red) | |
| Down | 3 (Brown/Red) | 1 (Red) | |
| Left | 2 (Red/Blue) | 3 (Brown/Red) | |
| Right | 3 (Brown/Red) | 2 (Red/Blue) | |