Service Procedure: Condenser: Inspection
WARNING: This page is about a different car, the 2001 Subaru Forester and 2000 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Make sure the condenser fins are free from dust and insects. If the fins are clogged, clean by blowing air or water through them.NOTE: To prevent dust and water from getting into the condenser, this work must be done when the condenser is installed in an actual vehicle.
- Check the condenser to see if it shows any sign of oil. Should oil ooze or gas leak from the condenser replace it with a new one.