lemon-mirror:
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (A/T Control Systems) >> AT Shift Lock Control Module >> Removal

AT Shift Lock Control Module: Removal

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery ground terminal.
    Fig 1: Disconnecting Battery Ground Terminal
    G02036916
  2. Remove the lower cover and then disconnect connector.
    Fig 2: Removing The Lower Cover
    G02036917
  3. Disconnect connector from AT shift lock control module.
  4. Remove the AT shift lock control module.