lemon-mirror:
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (On-Vehicle Service & Testing) >> Control Valve Body >> Installation

Control Valve Body: Installation

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the select lever in "N" position.
  2. Install the control valve and ground earth connectors.

    Tightening torque: 

    1. 8 N.m (0.8 kgf-m, 5.8 ft-lb) 
      Fig 1: Identifying Long & Short Bolts
      G02037047
  3. Connect all connector.
    Fig 2: Connecting All Connector
    G02037048
  4. Attach the magnet at the specified position.
    Fig 3: Attaching The Magnet
    G02037049
  5. Apply proper amount of liquid gasket to the entire oil pan mating surface.

    Fluid packing: 

    Tree Bond 1217B 

    Fig 4: Applying Liquid Gasket
    G02037050
  6. Install the oil pan.

    Tightening torque: 

    1. 4.9 N.m (0.5 kgf-m, 3.6 ft-lb) 
  7. Pour ATF into the oil charge pipe.

    Recommended fluid: 

    1. Dexron IIE or Dexron III type automatic transmission fluid 

    Fluid capacity:  9.3 - 9.6 l (9.8 - 10.1 US qt, 8.2 -8.4 Imp qt)

  8. Check the level of the ATF.
· About lemon-mirror