Brake Fluid: Replacement
CAUTION:
- The FMVSS No. 116, fresh DOT3 or 4 brake fluid must be used.
- Cover bleeder with waste cloth, when loosening it, to prevent brake fluid from being splashed over surrounding parts.
- Avoid mixing different brands of brake fluid to prevent degrading the quality of the fluid.
- Be careful not to allow dirt or dust to get into the reservoir tank.
NOTE:
- During bleeding operation, keep the clutch reservoir tank filled with brake fluid to eliminate entry of air.
- Clutch pedal operating must be very slow.
- For convenience and safety, it is advisable to have two men working.
- The amount of brake fluid required is approximately 70 ml (2.4 US fl oz, 2.5 lmp fl oz) for total clutch system.
- Either jack-up vehicle and place a safety stand under it, or lift-up vehicle.
- Remove both front and rear wheels.
- Draw out the brake fluid from reservoir tank with syringe.
- Refill reservoir tank with recommended brake fluid.
Recommended Brake Fluid:
- FMVSS No. 116, fresh DOT3 or 4 brake fluid
- Bleed air from oil line with the help of a co-worker. See ON-CAR SERVICE .