lemon-mirror:
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (HVAC) >> Compressor Oil >> Replacement

Compressor Oil: Replacement

WARNING: This page is about a different car, the 2001 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. After stabilization and discharge, replace the component, adding the appropriate amount of oil (DH-PR) to the new component before installation.
    Fig 1: Adding Appropriate Amount Of Oil (DH-PR) To New Component Before Installing
    G02133826
  2. If the compressor is replaced (after stabilization):
    1. Drain and measure the oil from the original compressor.
    2. Drain the oil from the replacement compressor and refill with the same amount that was drained from the original [20 me (0.7 US fl oz, 0.7 lmp fl oz) minimum]. Always use DH-PR for the replacement oil.
· About lemon-mirror