lemon-mirror:
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (HVAC) >> Condenser >> Installation

Section 101 (HVAC): Condenser: Installation

WARNING: This page is about a different car, the 2001 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. The condenser should be installed in the reverse order in which it was removed. When installing the condenser, pay attention to the following:
    CAUTION: Before connecting the pipe, be sure to apply oil to the periphery of O-ring.
    NOTE: After installing condenser, ensure that guide on lower side of condenser is inserted into hole in radiator panel. Tighten attaching bolts.
    Fig 1: Ensuring That Guide Pin On Lower Side Of Condenser Is Inserted Into Hole In Radiator Panel
    G02133856
  2. Charge refrigerant. See OPERATION  , Refrigerant Charging Procedure.
· About lemon-mirror