lemon-mirror:
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Automatic Trans) >> Dropping Resistor >> Installation

Dropping Resistor: Installation

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    1. Tightening torque:  6.4 N.m (0.65 kgf-m, 4.7 ft-lb)
    Fig 1: Installing Dropping Resistor
    G02875850Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror