Automatic Trans: Overhaul: ATF: Replacement
- Lift up the vehicle.
- Drain the ATF completely.CAUTION: Directly after the engine has been running, the ATF is hot.Be careful not to burn yourself.NOTE: Tighten the ATF drain plug after draining the ATF.
- Tightening torque: 25 N.m (2.5 kgf-m, 18.1 ft-lb)
- Lower the vehicle.
- Pour ATF into the oil charge pipe.
Recommended fluid:
- Dexron III type Automatic transmission fluid
Capacity:
- Fill the same amount of fluid drained from drain plug hole.
Capacity when transmission is overhauled:
- 9.3 - 9.6 l (9.8 - 10.1 US qt, 8.2 - 8.4 lmp qt)
- Check the level and leaks of ATF. See INSPECTION , ATF.