Modification To Fuel Tank Pressure Sensor (11-75-05)
Publication date: 2005-07-13Reference number: 11-75-05
MODIFICATION TO FUEL TANK PRESSURE SENSOR
TECHNICAL SERVICE BULLETIN
Reference Number(s): 11-75-05, Date of Issue:
July 13, 2005
| SUBARU: | 2005MY Legacy and Outback Vehicles |
INTRODUCTION
The purpose of this bulletin is to inform you of a running change in production. The Fuel Tank Sensor Control Solenoid Valve also referred to as Solenoid Valve Assembly has been eliminated. Also, the ECM logic, wiring harness and the connector to the valve have been changed accordingly. If the wrong combination of parts is used, DTC P1446 will be stored in memory.
INTRODUCTION CHART
| Part Name | Detail of Change | Vehicle | Starting VIN | Starting Date |
|---|---|---|---|---|
| ECM | Eliminated diagnostic logic for open circuit of the fuel tank sensor control solenoid valve circuit. | Legacy Sedan Legacy Wagon |
5*209728 5*325777 |
August 2, 2004 |
| Fuel Tank Pressure Sensor | Eliminated fuel tank sensor control solenoid valve from fuel tank pressure sensor. | Legacy Sedan Legacy Wagon |
5*210675 5*327945 |
August 11, 2004 |
| Cord-Fuel | Eliminated wiring harness and connector to fuel tank sensor control solenoid valve | Legacy Sedan Legacy Wagon |
5*211777 5*330673 |
August 23, 2004 |
PARTS DESCRIPTION CHART
| Part Name | New Part Number | Interchangeability | Old Part Number |
|---|---|---|---|
| ECM | 22611AH63D 22611AH91D 22611AH92C 22611AH93D 22611AH94C 22611AJ17C 22611AJ18C 22611AJ48D 22611AJ49D 22611AJ65C 22611AJ66C |
Updated ECM (new part) can be used in vehicles prior to the change in production. ECM (old part) cannot be used in vehicles after change in production. | 22611AH63B 22611AH91A 22611AH92A 22611AH93A 22611AH94A 22611AJ17A 22611AJ18A 22611AJ48A 22611AJ49A 22611AJ65A 22611AJ66A |
| Fuel Tank Pressure Sensor | 22627AA32A | Not interchangeable | 22627AA25A |
| Cord-Fuel | 81803AG03B | Not interchangeable | 81803A |