lemon-mirror:
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - Abs >> ABS Sequence Control >> Specification >> Conditions For Completion Of Abs Sequence Control

Conditions For Completion Of Abs Sequence Control

When the following conditions develop, the ABS sequence control stops and ABS operation is returned to the normal control mode.

  1. When the speed of at least one wheel reaches 10km/h (6 MPH).
  2. When the brake pedal is released during ABS sequence control and the stop light switch goes OFF.
  3. After completion of ABS sequence control.
  4. When malfunction is detected.
· About lemon-mirror