lemon-mirror:
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation/Driver Info >> Combination Meter >> Removal

Combination Meter: Removal

  1. Disconnect the ground cable from battery.
  2. Set the tilt steering at the lowest position.
  3. Remove the instrument panel under cover and lower cover of driver's seat side. < Ref. to REMOVAL , Instrument Panel Assembly. >
  4. Remove the screws of combination meter (one for upper side, two for lower side) and pull tilting the meter toward you.
    Fig 1: Removing Combination Meter
    G03833778Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector in the rear side of combination meter to remove meter.
CAUTION:
  • Be careful not to damage the meter or instrument panel.
  • Pay particular attention to avoid damaging the meter glass.