lemon-mirror:
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Automatic Transmission (Diagnostics) >> Learning Control >> Procedure

Learning Control: Procedure

  1. Turn the ignition switch to OFF.
  2. Turn the air conditioner switch to OFF.
  3. Turn the headlight switch to OFF.
  4. Turn the rear defogger switch to OFF.
  5. Start the engine.
  6. Connect the Subaru Select Monitor to the vehicle.
  7. Drive the vehicle for 5- 10 km (3- 6 miles) to warm up ATF temperature more than 70 °C (158 °F).
  8. With the throttle opening angle on Subaru Select Monitor indicates between 10%+/-2%, shift the gear from 1st --> 2nd, 2nd --> 3rd, 3rd --> 4th, 4th --> 5th while driving the vehicle at "D" range. < Ref. to , READ CURRENT DATA , OPERATION, Subaru Select Monitor. >
  9. Repeat the step 8) until reducing of shifting shock was felt.
  10. If reducing of shifting shock is not felt after 5 cycles, recheck that the learning conditions (throttle opening angle, ATF temperature, etc.) are as specified and recheck that other parts are normal.
· About lemon-mirror