Fuel Sub Level Sensor: Installation

Install in the reverse order of removal.

1. Make sure the sealing portion is free from fuel or foreign matter before installation.
2. Tighten the nuts and bolts to the specified torque in the order as shown in the figure.

Tightening torque: 

4.4 N.m (0.45 kgf-m, 3.2 ft-lb) 

Fig 1: Identifying Fuel Sub Level Sensor Bolts Tightening Sequence

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Identifying Fuel Sub Level Sensor Bolts

Courtesy of SUBARU OF AMERICA, INC.