lemon-mirror:
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Fuel Sub Level Sensor >> Removal

Fuel Sub Level Sensor: Removal

WARNING:
  • Place "NO FIRE" signs near the working area.
  • Be careful not to spill fuel on the floor.
  1. Drain fuel. < Refer to DRAINING FUEL , PROCEDURE, FUEL. >
  2. Remove the second seat. < Refer to REMOVAL , Second-row Seats. >
  3. Remove the service hole cover.
    Fig 1: Locating Service Hole Cover
    G05031085Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the connector from the fuel sub level sensor.
    Fig 2: Locating Fuel Sub Level Sensor Connector
    G05016927Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the quick connector, and then disconnect the fuel delivery hose, return hose and jet pump hose. < Refer to REMOVAL , FUEL DELIVERY, RETURN AND EVAPORATION LINES. >
  6. Remove the nuts and bolts which install fuel sub level sensor on fuel tank.
    Fig 3: Identifying Delivery And Jet Pump Hose
    G05031111Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the fuel sub level sensor.
· About lemon-mirror