lemon-mirror:
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Intake Manifold >> Disassembly

Intake Manifold: Disassembly

  1. Remove the engine harness from intake manifold.
  2. Remove the throttle body. < Refer to REMOVAL , THROTTLE BODY. >
  3. Remove the manifold absolute pressure sensor. < Refer to REMOVAL , MANIFOLD ABSOLUTE PRESSURE SENSOR. >
  4. Remove the purge control solenoid valve. < Refer to REMOVAL , Purge Control Solenoid Valve. >
  5. Loosen the clamp which holds fuel injector pipe to fuel hose, and then disconnect the pipe from fuel hose.
    Fig 1: Locating Fuel Injector Pipe Clamp
    G05018427Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the bolts which install fuel pipes on intake manifold.
    Fig 2: Locating Fuel Pipes Bolts (1 Of 2)
    G05018428Courtesy of SUBARU OF AMERICA, INC.
    Fig 3: Locating Fuel Pipes Bolts (2 Of 2)
    G05018429Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror