Intake Manifold: Installation

Install the intake manifold onto cylinder heads.
NOTE: Use new O-rings.

Tightening torque:

25 N.m (2.5 kgf-m, 18 ft-lb)
- RH side
  
  Fig 1: Locating Intake Manifold RH Bolts
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
Fig 2: Locating Intake Manifold LH Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the bolts which hold fuel injector pipe RH to cylinder head.
Tightening torque:

19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 3: Locating Fuel Injector Pipe RH Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the engine harness to fuel injector pipe RH.
Install the fuel pipe protector RH.
Tightening torque:

19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 4: Locating Fuel Pipe Protector RH
Courtesy of SUBARU OF AMERICA, INC.
Install the bolts which hold fuel injector pipe LH to cylinder head.
Tightening torque:

19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 5: Locating Fuel Injector Pipe LH Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the engine harness to fuel injector pipe LH.
Install the fuel pipe protector LH.
Tightening torque:

19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 6: Locating Fuel Pipe Protector LH
Courtesy of SUBARU OF AMERICA, INC.
Connect the fuel hoses to fuel pipe.

Fig 7: Identifying Fuel Hoses
Courtesy of SUBARU OF AMERICA, INC.
Connect the brake booster hose.

Fig 8: Identifying Brake Booster Hose
Courtesy of SUBARU OF AMERICA, INC.
Connect the PCV hose.

Fig 9: Identifying PCV Hose
Courtesy of SUBARU OF AMERICA, INC.
Connect the engine coolant hoses to throttle body.

Fig 10: Identifying Engine Coolant Hoses
Courtesy of SUBARU OF AMERICA, INC.
Connect the connector to throttle body.

Fig 11: Identifying Throttle Body Connector
Courtesy of SUBARU OF AMERICA, INC.
Install the generator. < Refer to INSTALLATION , Generator. >
Install the air cleaner case and air intake chamber. < Refer to INSTALLATION , Air Cleaner Case. > < Refer to INSTALLATION , Air Intake Chamber. >
Install the fuse of fuel pump to main fuse box.
Connect the ground cable to the battery.
Install the collector cover.