Extension Case: Installation

Attach the selected reduction driven gear shim to end surface of reduction driven gear with Vaseline. < Refer to ADJUSTMENT , REDUCTION DRIVEN GEAR. >
Install the extension case.
NOTE: Use a new gasket.

Tightening torque: 25 N.m (2.5 kgf-m, 18 ft-lb)

Fig 1: Identifying Extension Case
Courtesy of SUBARU OF AMERICA, INC.
Install the rear vehicle speed sensor.
Tightening torque: 7 N.m (0.7 kgf-m, 5.2 ft-lb)

Fig 2: Identifying Rear Vehicle Speed Sensor
Courtesy of SUBARU OF AMERICA, INC.
Install the transmission assembly.
< Refer to INSTALLATION , AUTOMATIC TRANSMISSION ASSEMBLY. >