lemon-mirror:
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> Front Differential Assembly >> Disassembly >> Differential Case Assembly

Differential Case Assembly

  1. Remove the taper roller bearing using the ST and a press.

    ST 498077000 REMOVER

    Fig 1: Removing Taper Roller Bearing Using ST (498077000)
    G05032196Courtesy of SUBARU OF AMERICA, INC.
  2. Secure the case in a vise, remove the hypoid driven gear tightening bolts, and then separate the hypoid driven gear into case (RH) and case (LH).
    Fig 2: Separating Hypoid Driven Gear Into Case (RH) And Case (LH)
    G05032197Courtesy of SUBARU OF AMERICA, INC.
  3. Pull out the straight pin and shaft, and then remove the differential bevel gear, washer and differential bevel pinion.
    Fig 3: Pulling Out Straight Pin And Shaft
    G05032198Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror