lemon-mirror:
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> Front Differential Assembly >> Installation

Front Differential Assembly: Installation

  1. When installing the differential assembly to case, be careful not to damage the inside of case (particularly, the differential side retainer mating surface).
    Fig 1: Identifying Differential Assembly
    G05032194Courtesy of SUBARU OF AMERICA, INC.
  2. Install the O-ring to left and right side retainer.
  3. Using the ST, install the side retainer. < Refer to REMOVAL , FRONT DIFFERENTIAL ASSEMBLY. >

    ST 18630AA010 WRENCH COMPL RETAINER

  4. Adjust the backlash of the front differential. < Refer to ADJUSTMENT , FRONT DIFFERENTIAL ASSEMBLY. >
  5. Install the lock plate.

    Tightening torque: 25 N.m (2.5 kgf-m, 18 ft-lb) 

    Fig 2: Identifying Lock Plate
    G05032195Courtesy of SUBARU OF AMERICA, INC.
  6. Install the converter case to the transmission case. < Refer to INSTALLATION , CONVERTER CASE. >
  7. Install the transmission harness connector to the stay.
  8. Install the ATF filter pipe. < Refer to INSTALLATION , ATF COOLER PIPE & HOSE. >
  9. Install the oil charge pipe together with an O-ring. < Refer to INSTALLATION , Oil Charge Pipe. >
  10. Install the torque converter assembly. < Refer to INSTALLATION , TORQUE CONVERTER ASSEMBLY. >
  11. Install the transmission assembly to the vehicle. < Refer to INSTALLATION , AUTOMATIC TRANSMISSION ASSEMBLY. >
· About lemon-mirror