Front Vehicle Speed Sensor: Installation

Install the front vehicle speed sensor.
Tightening torque: 7 N.m (0.7 kgf-m, 5.2 ft-lb)

Fig 1: Identifying Front Vehicle Speed Sensor Securing Bolt
Courtesy of SUBARU OF AMERICA, INC.
Connect the front vehicle speed sensor connector.
Apply proper amount of liquid gasket to the entire oil pan mating surface.
Liquid gasket: THREE BOND 1217B (Part No. K0877YA020)

Fig 2: Applying Liquid Gasket To Entire Oil Pan Mating Surface
Courtesy of SUBARU OF AMERICA, INC.
Install the oil pan by equally tightening the bolts.
Tightening torque: 5 N.m (0.5 kgf-m, 3.7 ft-lb)
Install the center differential carrier. < Refer to INSTALLATION , CENTER DIFFERENTIAL CARRIER. >
Install the extension case.
Tightening torque: 25 N.m (2.5 kgf-m, 18 ft-lb)

Fig 3: Identifying Extension Case
Courtesy of SUBARU OF AMERICA, INC.
Install the rear vehicle speed sensor.
Tightening torque: 7 N.m (0.7 kgf-m, 5.2 ft-lb)

Fig 4: Identifying Rear Vehicle Speed Sensor
Courtesy of SUBARU OF AMERICA, INC.
Install the transmission assembly to the vehicle. < Refer to INSTALLATION , AUTOMATIC TRANSMISSION ASSEMBLY. >
Pour ATF from the oil charge pipe. < Refer to REPLACEMENT , AUTOMATIC TRANSMISSION FLUID. >
Check the level and leaks of ATF. < Refer to INSPECTION , AUTOMATIC TRANSMISSION FLUID. >