Transmission Control Device: Installation

Install the detention spring to the transmission case.
Tightening torque: 7 N.m (0.7 kgf-m, 5.2 ft-lb)

Fig 1: Identifying Detent Spring
Courtesy of SUBARU OF AMERICA, INC.
Insert the select lever, and then tighten the bolt.
Tightening torque: 6 N.m (0.6 kgf-m, 4.4 ft-lb)

Fig 2: Identifying Select Lever And Bolt
Courtesy of SUBARU OF AMERICA, INC.
Insert the manual plate and parking rod.

Fig 3: Identifying Select Lever, Manual Plate And Parking Rod
Courtesy of SUBARU OF AMERICA, INC.
Insert the spring pin to the manual plate.

Fig 4: Identifying Spring Pin And Manual Plate
Courtesy of SUBARU OF AMERICA, INC.
Install the oil pan and the control valve assembly. < Refer to INSTALLATION , CONTROL VALVE BODY. >
Install the pitching stopper bracket.
Tightening torque: 41 N.m (4.2 kgf-m, 30.4 ft-lb)
Insert the transmission connector to the stay.
Install the air breather hose. < Refer to INSTALLATION , AIR BREATHER HOSE. >
Install the torque converter assembly. < Refer to INSTALLATION , TORQUE CONVERTER ASSEMBLY. >
Install the transmission assembly to the vehicle. < Refer to INSTALLATION , AUTOMATIC TRANSMISSION ASSEMBLY. >