Transmission Control Module (TCM): Installation

Install the relay to TCM body.
Install the TCM.
Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Fig 1: Disconnecting/Connecting Connector At TCM
Courtesy of SUBARU OF AMERICA, INC.
Connect the connector to the TCM.
Install in the reverse order of removal.
Perform Clear Memory 2 operation. < Refer to CLEAR MEMORY MODE , OPERATION, Subaru Select Monitor. >
Perform the inspection with driving the vehicle at the end of repair work, and make sure there is no faulty as below;

NOTE: If excessive shift shock is felt, execute advance operation of learning control. < Refer to PROCEDURE , Learning Control. >