lemon-mirror:
Home >> Subaru >> 2006 >> Baja Base, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Entry Control Module >> Removal

Keyless Entry Control Module: Removal

  1. Disconnect ground cable from battery.
  2. Remove glove box. < Ref. to REMOVAL , GLOVE BOX. >
  3. Remove nut, then remove keyless entry control module (A) and the other electrical control module (B) while disconnecting connector.
    Fig 1: Identifying Keyless Entry Control Module And Electrical Control Module
    G04991662Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect keyless entry control module and the other control module.
· About lemon-mirror