Differential Case Assembly

Using a press and ST, remove the taper roller bearing.
ST 498077000 REMOVER

Fig 1: Identifying Taper Roller Bearing
Courtesy of SUBARU OF AMERICA, INC.
Secure the case in a vise and remove the crown gear tightening bolts, then separate the crown gear, case (RH) and case (LH).

Fig 2: Identifying Crown Gear And Differential Case
Courtesy of SUBARU OF AMERICA, INC.
Pull out the straight pin and shaft, and remove the differential bevel gear, washer, and differential bevel pinion.

Fig 3: Identifying Straight Pin And Shaft
Courtesy of SUBARU OF AMERICA, INC.