VTD Model

Press-fit the new oil seal using ST and the press. ST 498057300 INSTALLER
Press-fit the dust cover.
Install the transfer clutch pipe to the extension case without bending the pipe.

Fig 1: Identifying Transfer Clutch Pipe
Courtesy of SUBARU OF AMERICA, INC.
Install the test plug.
Tightening torque:

13 N.m (1.3 kgf-m, 9.4 ft-lb)

Fig 2: Identifying Test Plug
Courtesy of SUBARU OF AMERICA, INC.
Insert the multi-plate clutch, drive plate, driven plate and spring retainer.

Fig 3: Identifying Multi-Plate Clutch, Drive Plate, Driven Plate And Spring Retainer
Courtesy of SUBARU OF AMERICA, INC.
Install the circlip using ST1, ST2 and ST3.
ST1 398673600 COMPRESSOR

ST2 498627100 SEAT

ST3 398663600 PLIERS

Fig 4: Identifying Circlip

Courtesy of SUBARU OF AMERICA, INC.