Extension Case: Installation

Apply vaseline to the selected thrust needle bearing, and install to the reduction drive gear end surface. <Ref. to ADJUSTMENT TRANSFER CLUTCH. >
NOTE: Install the thrust needle bearing in the correct direction.
Install a new gasket.
Install the extension case to transmission case.
Tighten bolts to secure the extension case.
Tightening torque:

25 N.m (2.5 kgf-m, 18.1 ft-lb)

Fig 1: Identifying Transmission Case And Extension Case Sections
Courtesy of SUBARU OF AMERICA, INC.
Install the rear vehicle speed sensor.
Tightening torque:

7 N.m (0.7 kgf-m, 5.1 ft-lb)

Fig 2: Identifying Rear Vehicle Speed Sensor
Courtesy of SUBARU OF AMERICA, INC.
Install the transmission assembly.
<Ref. to INSTALLATION AUTOMATIC TRANSMISSION ASSEMBLY. >