lemon-mirror:
Home >> Subaru >> 2006 >> Forester X, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Front Differential Assembly >> Disassembly >> Differential Case Assembly

Differential Case Assembly

  1. Remove the taper roller bearing using the ST and a press.

    ST 498077000 REMOVER

    Fig 1: Identifying Taper Roller Bearing
    G05002714Courtesy of SUBARU OF AMERICA, INC.
  2. Secure the case in a vise and remove the hypoid driven gear tightening bolts. Then separate the hypoid driven gear into the differential case (RH) and the differential case (LH).
    Fig 2: Securing Case In Vise
    G04994277Courtesy of SUBARU OF AMERICA, INC.
  3. Pull out the straight pin and pinion shaft, and then remove the differential bevel gear, washer and differential bevel pinion.
    Fig 3: Pulling Out Straight Pin And Pinion Shaft
    G04994278Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror