lemon-mirror:
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Security System >> Inspection >> Check Security System Condition Memory

Check Security System Condition Memory

  1. Remove the key from ignition switch.
  2. Close all the doors, trunk lid and rear gate.
  3. Open the front hood.
  4. Press the LOCK button of transmitter, and then wait until the security indicator light flashes twice for 0.5 sec at intervals of 2 seconds.
  5. Disconnect the ground cable from battery.
  6. Connect the ground cable to battery.
  7. Check that the security indicator light blinks twice within 0.5 seconds at 2 seconds intervals. When it does not blink, replace the body integrated unit.
· About lemon-mirror