lemon-mirror:
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation/Driver Information >> Combination Meter System >> Inspection >> Symptom Chart

Symptom Chart

SYMPTOM CHART

Symptom Repair order Reference
Combination meter assembly does not operate.
  1. Power supply
  2. Ground circuit
  3. Combination meter
< Ref. to CHECK POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, Combination Meter System. >
Speedometer does not operate.
  1. ABSCM or VDCCM
  2. Harness
  3. Combination meter
< Ref. to CHECK ABSCM OR VDCCM , INSPECTION, Combination Meter System. >
Tachometer does not operate.
  1. ECM
  2. Harness
  3. Combination meter
< Ref. to CHECK ENGINE CONTROL MODULE (ECM) , INSPECTION, Combination Meter System. >
Fuel gauge does not operate.
  1. Communication circuit
  2. Fuel level sensor
  3. Harness
  4. Combination meter
< Ref. to CHECK FUEL LEVEL SENSOR , INSPECTION, Combination Meter System. >
Engine coolant temperature gauge does not operate.
  1. Communication circuit
  2. Engine coolant temperature sensor
  3. Harness
  4. Combination meter
< Ref. to CHECK ENGINE COOLANT TEMPERATURE SENSOR. , INSPECTION, Combination Meter System. >
Error display is shown on the ODO/trip meter. Communication circuit < Ref. to COMMUNICATION ERROR DISPLAY , INSPECTION, Combination Meter System. >
CAUTION: When measuring the voltage and resistance of each control module or sensor, use a tapered pin with a diameter of less than 0.64 mm (0.025 in) in order to avoid poor contact. Do not insert the pin more than 2 mm (0.08 in).