lemon-mirror:
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Cruise Control System) >> Cruise Control Module >> Removal >> Non-Turbo Model

Non-Turbo Model

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ground cable from battery.
  2. Remove glove box. < Ref. to REMOVAL , GLOVE BOX. >
  3. Remove nut, then remove cruise control module (A) and the other electrical control module (B) while disconnecting connector.
    Fig 1: Locating Electrical Control Module Nut
    G04991868Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect cruise control module and the other electrical control module.
· About lemon-mirror